PTFE (Teflon) coated fiberglass open mesh belt selects fine fiberglass, Kevlar or Nomex as basic weaving material,
Coated with excellent PTFE (Teflon) resin to make it into several of PTFE (Teflon) conveyor belt.
It is include mesh size 1mm*1mm, 2mm*2.5mm, 4mm*4mm and 10mm*10mm, and according to the different warp and weft, there are single weft PTFE open mesh conveyor belt and double weft PTFE open mesh conveyor belt.
Technical data sheet of Teflon Coated Glassfiber Fabric
Item No | Mesh size | Thickness | material | Max width | weight | Temperature |
M001 | 1*1mm | 0.5 mm | Fiberglass | 4000mm | 390g/m² | -70-360 |
M002 | 2*2mm | 0.7 mm | Fiberglass | 4000mm | 450g/m² | -70-360 |
M003 | 4*4mm | 1.0 mm | Fiberglass | 4000mm | 500g/m² | -70-360 |
M004 | 4*4mm | 1.0 mm | Fiberglass | 4000mm | 480g/m² | -70-360 |
M008 | 4*4mm | 1.0 mm | Fiberglass | 4000mm | 570g/m² | -70-360 |
M012 | 4*4mm | 1.0 mm | Fiberglass | 4000mm | 580g/ m² | -70-360 |
M013 | 10*10mm | 1.0 mm | Fiberglass | 4000mm | 450g/m² | -70-360 |
M014 | 0.5*1mm | 0.5 mm | Fiberglass | 4000mm | 420g/m² | -70-360 |
M015 | 2*2.5mm | 0.9 mm | Fiberglass | 3000mm | 470g/m² | -70-360 |
Main Features
1. Outstanding temperature resistance (from -170ºC to +260ºC)
2. Resistant to corrosive agents
3. Low thermal mass
4. Controlled porosity
5. Superior non-stick surface, easy to clean
6. Dimensional stability
7. Non-toxic
• Applied in between -70°C and 360°C, weathering resistance and ageing resistance.
• Resistance to bending fatigue, can be used for smaller wheel diameter.
• Chemical corrosion resistance, Resistance to strong acid, Strong base and a variety of organic solvents.
• Non-stick: Any material is not easy to stick to it. And any stain or spot on it is easy to be cleaned away.
• Chemical resistance and nontoxicity. Resistance to almost all chemical reagents.
• Good dimensional stability (coefficient of elongation less than 5‰) and high strength. Good mechanical characteristics.
• Good mechanical properties.
• Permeability, air permeability of conveyor belt can reduce heat source consumption and improve drying efficiency.
• Fire proof. Even flame cannot cause it burning.
ptfe coated mesh conveyor belt Usage:
PTFE open mesh belts are used in screen printing to transport imprinted materials through drying ovens and cooling chambers.
These belts are long lasting and perform well over a wide range of operating temperatures.
Fiber teflon belt fabrication department can supply a wide variety of splices and edge reinforcements in order to respond customer’s specific applications.
Packaging & Delivery
China supplier fine workmanship mica electrical insulation tape Packaging in rolls with 50meters length or 100meters length then put in exported paper carton
Port: Shanghai,Ningbo,Tianjing and Shenzhen
Lead Time: Shipped in 3 days after payment